我們知道升降機是一種多功能起重裝卸機械設備。除作為不同高度的貨物輸送外，廣泛應用于高空的安裝、維修等作業。隨著科技的進步。We know that the Shanghai lift is a versatile lifting and handling equipment. In addition to the delivery of goods at different heights, is widely used in the installation, maintenance and other operations at high altitude. With the progress of science and technology.

升降平臺已經發展成可以具備各種形式的使用要求，所以其結構也就更加的復雜，在檢查和維修的時候，就更要注意些細節的問題。今天上海升降機就為大家介紹一下，在拆卸升降平臺部件的時候要注意些什么細節。Lifting platform has been developed into various forms of the use of requirements, so the structure is more complex, in the inspection and maintenance of the time, we should pay attention to some of the details of the problem. Today, Shanghai elevator for everyone to introduce, in the demolition of the lifting platform parts to pay attention to what the details. 
 
升降機拆卸液壓油箱加油蓋、濾清器蓋、檢測孔、液壓油管等部位，造成系統油道暴露時要避開揚塵，拆卸部位要先徹底清潔后才能打開。Shanghai lift the demolition of hydraulic fuel tank fuel tank, filter cover, detection hole, hydraulic oil pipe and other parts, resulting in the system to avoid the oil channel exposure to dust, remove the parts must be thoroughly cleaned before opening.

如拆卸升降機液壓油箱加油蓋時，先除去油箱蓋四周的泥土，擰松油箱蓋后，清除殘留在接合部位的雜物（不能用水沖洗以免水滲入油箱），確認清潔后才能打開油箱蓋。Such as the demolition of Shanghai elevator hydraulic gas tank cover, remove the dirt around fuel tank cover, unscrew the oil tank cover, remove the residual in the joint position of the debris (not wash with water to prevent water infiltration, confirmed after cleaning tank) to open the fuel tank cap.

升降機如需使用擦拭材料和鐵錘時，應選擇不掉纖維雜質的擦拭材料和擊打面附著橡膠的專用鐵錘。液壓元件、液壓膠管要認真清洗，用高壓風吹干后組裝。Shanghai lifts the use of wiping material and the hammer, hammer should choose not to drop special materials and striking surface impurities attached rubber fiber. Hydraulic components, hydraulic hose to wash, with high pressure air drying after assembly.

選用包裝完好的正品濾芯（內包裝損壞，雖然濾芯完好，也可能不潔）。升降機換油時同時清洗濾清器，安裝濾芯前應用擦拭材料認真清潔濾清器殼內底部污物。Selection of packing intact authentic filter (inner packaging damage, although the filter is well, it may not clean). Shanghai lifts when changing the oil and filter cleaning and installation of the filter before the application of wiping material carefully cleaning the filter shell bottom dirt.