1.超載運行，液壓升降機在超載情況下會對油缸及電機造成沉重負擔，久之運行，很容易造成機身溫度偏高，應及時卸載，控制在額定載荷范圍內。Overload operation, hydraulic lift in Shanghai under the conditions of overload will be a heavy burden on the cylinder and motor, a long run, it is easy to cause the body temperature is high, should be promptly unloaded, controlled within the scope of the rated load.

2.升降機鋁材間卡住或摩擦力過大，造成這一現象的原因多是鋁材間進入雜物，應當進行清理。Shanghai lift between the aluminum material is too large, the cause of this phenomenon is caused by the material into the debris, should be cleaned.

3.油缸或電機損壞，作為上海升降機的核心部分，出現溫度過高，這是必須檢查的。Cylinder or motor damage, as the core part of the Shanghai elevator, the temperature is too high, it is necessary to check the.

4.烈日下暴曬加之頻繁工作，要掌握好時間，讓上海升降機間歇性工作，在夏季連續性工作，由于散熱不及時，容易燒壞電機。Under the hot sun and frequent work, must grasp the time, let Shanghai lift intermittent work, continuous work in the summer, because the heat is not timely, easy to burn out the motor.